Solutions
Non-Destructive Testing (NDT)
Non-destructive testing services that detect flaws in materials and welds in industrial facilities, pipelines and power plants without causing any damage.
Non-Destructive Testing (NDT) is the collective set of inspection methods used to detect discontinuities, defects and flaws on the surface and inside a material or component without taking it out of service or damaging its physical integrity. Methods such as radiographic, ultrasonic, magnetic particle, penetrant and visual testing are selected according to the material type and the kind of defect sought.
TÜV AUSTRIA SILA KALİTE provides NDT services including radiographic testing, ultrasonic testing, magnetic particle testing, penetrant testing, eddy current testing, visual testing, leak and pressure testing, positive material identification and ferrite content measurement with its experienced staff and advanced equipment.
Related services
Radiographic Testing
A method that uses X-rays or gamma rays to image internal voids, thickness and density of a material on radiation-sensitive film.
View detailsUltrasonic Testing
A method that determines the location and type of discontinuities using the reflections of high-frequency sound waves inside the material.
View detailsMagnetic Particle Testing
A method based on creating a magnetic field in the test piece to detect surface defects in ferromagnetic materials.
View detailsPenetrant Testing
The most widely used NDT method, detecting surface-breaking defects using a visible or fluorescent dye solution.
View detailsVisual Testing
The oldest and most common NDT method, examining surface flaws and discontinuities with or without auxiliary equipment.
View detailsEddy Current Testing
An inspection performed on conductive materials using an alternating magnetic field generated by a test coil and the induced eddy currents.
View detailsPositive Material Identification (PMI)
A method that characterizes a material quantitatively and qualitatively by measuring the characteristic radiation released from atoms by X-rays.
View detailsFerrite Content Measurement
Measurement performed to guarantee an acceptable ferrite content in the final product after welded fabrication of austenitic, duplex and super duplex materials.
View detailsLeak and Pressure Testing
A testing method used to detect possible defects in the bottom plates, butt welds and corner welds of tanks.
View detailsGet a quote for your project
Receive a fast, GDPR/KVKK-compliant response for the inspection or certification service you need.